Other services we offer:
When ordering your scooter box we need to know if you want louvre's in either the door, back panel or both.
We can add these free of charge but need to do it as we make the box, they can’t be added afterwards.
At times your scooter will go in the box wet so louvre's can help with condensation allowing air to circulate.
Also some people have an electricity point fitted inside the box (we don’t offer this service) so the scooter can be charged,
The Louvre's help in this case as heat can be generated from the charger.
We also need to know which side you want the handle to be on.
The box can make either Left or Right hand, it can’t change it afterwards!
Bellow is the Biggest scooter box we make. Mainly its supplied to councils but can be offered to individuals.
If you want this size for a caravan site please get permission from the owner or site manager before ordering.
All our boxes are fully built up in our workshop so we need good access for the box to be sited.
The removable door bar has
A handy handle so that you can
Remove it without bending down.
The scooter box door is supplied with a drop bolt. So the door is held secure whilst accessing the box.
When the box is sited the ground can be uneven, so we fit 4 adjusting feet internally so we can level the box. To stop it rocking
This is a left hand Box
This is a right hand Box
The boxes above were fitted at a housing association.
All the boxes come with 2 keys per box unique to that box only .
We can then supply the site manager with a master key so he or she can open all the boxes with 1 key.
View of the large scooter box from inside.
The large scooter box allows you to put your scooter away with the all weather cover still attached.
The large scooter box is made in the same way as the smaller one, but has 3 hinges down the side to allow for the longer door.
All boxes are fixed down through the floor ground conditions permitting.
The large scooter box weighs approximately 16 stone.
This is a typical installation at a caravan site.